LOCATION : HOME > News > Industry News
Boiler boilers are highly automated
user:admin time:2018-07-24 view:1657
Boiling boiler body design optimization, heating surface is large; high thermal efficiency, fast heating, sufficient supply of hot water; high degree of automation, hydration, combustion, temperature control, automatic cycle operation; compact overall layout, small footprint, easy installation; beautiful appearance .
Boiler boiler operating regulations:
1. Boiler workers who have passed the training and assessment can operate independently. It is strictly forbidden to operate the boiler without a license.
2. Before using the boiler, check the pressure gauge and safety valve, whether the liquid level gauge is used well. If the safety accessories are not qualified, it is forbidden to open the furnace and check whether the fuel gas valve and other valves are leaking.
3. When the boiling water boiler starts to ignite, it must be ignited by using the ignition rod. The fire should not be too large at the beginning, and the temperature should not be too fast to avoid partial heating unevenness, which will directly affect the service life of the boiler.
4. The water inlet speed of the boiling water boiler should not be too fast. After the fire, the water level in the furnace should be observed at any time. When the water level reaches or exceeds the high water level of the zui, the sewage should be discharged as soon as possible and the water level should be lowered.
5. When a special noise occurs in the furnace, it is necessary to check immediately. It is necessary to stop the furnace inspection.
6. During the operation of the boiler, the water in the bubble should be kept at the specified water level. The boiler should always check the pressure gauge and the pressure should not exceed the operating pressure of the boiler.
7. When the boiling water boiler is full of water, it should be drained in time to stop the water supply and return the water level to normal.
8. After the boiler is stopped, it is necessary to wait for the water to slowly cool to below 70 °C, in order to release the water in the furnace, and then remove the scale after processing.
